Checking And Indication Of The Revision Number; Stamp Of Maintenance Board Indication - Oki C310dn Maintenance Manual

Oki Data CONFIDENTIAL

8.3.2 Checking and indication of the revision number

(1) Print out MenuMap and check to make sure that the firmware revision number has
been updated.
(2) According to the revision number of the downloaded firmware, fill in the box(s) of an
ROM label attached to the position shown in the picture below.
Position of the revision number label
Details of the revision number label
Sample 1 Revision 1
Sample 2 Revision 4
44346001TH Rev.1
1 2 3 4 5
4 5
1 2 3

8.3.3 Stamp of maintenance board indication

A designated article number is stamped in the area for maintenance board indication on the
CU board in accordance with the table below.
C530/C330
PCB number seal number
44424001 01
44424002 02
44424003 03
44424004 04
44424005 05
44424011 11
44424012 12
44424013 13
8. CONNECTION DIAGRAMS
Designated
stamping
location
Board CLP(YU) Use
CLP-2(44601502) C530 for ODA
CLP-2(44601502) C530 for OEL
CLP-2(44601502) C530 for AOS
CLP-2(44601502) C530 for JPN
CLP-2(44601502) ES5430(OEL)
CLP-1(44601501) C330 for ODA
CLP-1(44601501) C330 for OEL
CLP-1(44601501) C330 for AOS
1 /