Oki C310dn Maintenance Manual page 131

Oki Data CONFIDENTIAL
Panel display ( identi- On- Atten-
fies that no display is line tion
provided) lamp lamp
Varies On
%COLOR%
TONER REGIONAL
MISMATCH
Varies On
NON GENUINE
%COLOR% TONER
Varies On
%COLOR% TONER
SENSOR ERROR
Blink Varies
PS3 EMUL ERROR
Varies On
(Off)
ORDER IMAGE DRUM
UNIT
44346001TH Rev.1
Detail
Indicates a toner cartridge is not for the Ask the
printer. customer to use
%COLOR% a proper part.
Y
M
C
K
Indicates a toner cartridge is not for the Inform the
printer. customer that
%COLOR% failures out of
Y
improper use of
M
a part are not
C
repaired without
K
charge, and ask
the customer
to use a proper
part.
Indicates a toner sensor error. When Check the toner
having an error during printing in the sensor.
shipping mode, the printer provides
this warning. When the printer detects
an error while warming up, it has an
ERROR 540 to 543.
%COLOR%
Y
M
C
K
The printer provides a Service Call 160
to 163 in the Factory mode.
Indicates the PostScript interpreter Check the print
data
detected an error.
Check the print data(C530 and C330)
Indicates an image drum is near the
end of its life. The printer can still
perform printing until causing an image
drum life error. With ADMIN MENU-
CONFIG MENU-NEARLIFE LED set
to DISABLE, the attention LED is not
lighting.
Panel display ( identi-
Solution fies that no display is
provided)
ORDER FUSER
ORDER BELT
FUSER LIFE
BELT LIFE
%COLOR% TONER
EMPTY
−
On- Atten-
line tion Detail
lamp lamp
Varies On Indicates the fuser is near the end of
(Off) its life. With ADMIN MENU-CONFIG
MENU-NEARLIFE LED set to DISABLE,
the attention LED is not lighting.
Varies On Indicates the transfer belt is near the
(Off) end of its life. This display is a warning
and the printer does not stop printing.
With ADMIN MENU-CONFIG MENU-
NEARLIFE LED set to DISABLE, the
attention LED is not lighting.
Varies On Indicates the fuser is at the end of its
life (a warning). This display is only
a warning (not a life error). By cover
opening and closing after the printer has
a fuser life error, this status is displayed.
Varies On Indicates the transfer belt is at the end
of its life (a warning). This display is only
a warning (not a life error). By cover
opening and closing after the printer
has a transfer belt life error, this status
is displayed.
Varies On Indicates the printer ran out of toner.
When temporally recovered by cover
opening and closing during a toner-
empty error, the printer develops this
status (warning).
%COLOR%
Y
M
C
K
7. TROUBLESHOOTING
Solution
−
−
Replace the
fuser to a new
one.
Replace the
belt unit to a
new one.
Replace the
cartridge of the
toner to a new
one.
131 /