Oki Data CONFIDENTIAL
4.2 Part replacement procedure
This section describes the procedure for replacing the parts and assemblies shown in the
disassembly diagrams below.
4.2.1 Belt unit
(1) Open the top cover.
(2) Remove the image drum unit ① .
top cover
Note! Cover the removed image drum cartridges with a piece of black paper.
black paper
44346001TH Rev.1
(3) Turn the (two blue) lock handles of the belt unit ② in the direction of the arrows
and, holding the unit by the (blue) handle, detach the unit.
4.REPLACEMENT OF PARTS
Lock lever (blue)
Lock lever (blue)
60 /