Oki C310dn Maintenance Manual page 135

Oki Data CONFIDENTIAL
Panel display ( identi- On- Atten-
fies that no display is line tion
provided) lamp lamp
PRESS ONLINE SW Varies On
DISK USE FAILED
%FS_ERR%
PRESS ONLINE SW Varies Varies Prompts pressing the ONLINE button
INVALID DATA
*PDL
PRESS ONLINE SW
INVALID DATA OR
TIMEOUT
*GDI
44346001TH Rev.1
Detail
Indicates a file system error other than Replace the
the above file system-related status SD memory
card only for
states occurred. Processing that does
use of printing,
not use the file system is available.
such as secure
%FS_ERR%
printing.
=0 GENERAL ERROR
=1 VOLUME NOT AVAILABLE
=3 FILE NOT FOUND
=4 NO FREE FILE DESCRIPTORS
=5 INVALID NUMBER OF BYTES
=6 FILE ALREADY EXISTS
=7 ILLEGAL NAME
=8 CANT DEL ROOT-
=9 NOT FILE
=10 NOT DIRECTORY
=11 NOT SAME VOLUME
=12 READ ONLY
=13 ROOT DIR FULL
=14 DIR NOT EMPTY
=15 BAD DISK
=16 NO LABL
=17 INVALID PARAMETER
=18 NO CONTIG SPACE
=19 CANTCHANGE ROOT
=20 FD OBSOLETE
=21 DELETED
=22 NO BLOCK DEVICE
=23 BAD SEEK
=24 INTERNAL ERROR
=25 WRITE ONLY
Press the
to clear this warning as the printer ONLINE button.
received invalid data. This display is
provided at reception of an unsupported
PDL command.
Panel display ( identi-
Solution fies that no display is
provided)
%MEDIA_SIZE% MP
LOAD
%MEDIA_SIZE% IN
MP TRAY
AND PRESS ONLINE
SWITCH
C310dn/C330dn/C510dn/C530dn displays the following service call error when detecting an
unrecoverable error:
Service Call
nnn: Error
Note! An error code is identified by nnn.
The printer displays a service call with an error code and corresponding error information
in the lower LCD display. The error information (such as a number indicating an address)
is used for problem analysis and solution, and must be retained, and notified to related
departments. Tables 7-1-1 and 7-1-2 outline error codes, their meanings and the solutions for
them.
On- Atten-
line tion Detail
lamp lamp
On Off Indicates a request for printing by
manual feeding occurred. This display
prompts feeding manually paper
identified by %MEDIA SIZE%. The unit
of Custom paper size conforms to the
specified (menu-set) display unit for the
MP tray unless specified with a driver.
With a unit specified for Custom paper
size in a driver, the display shows a
Custom paper size in the unit. Custom
paper size is expressed by <width> x
<length> <unit>.
Examples:
210 x 297 mm
8.5 x 11.0 inches
7. TROUBLESHOOTING
Solution
Press the
ONLINE
button.
* Data is
deleted unless
the button is
pressed within
the time set
for MANUAL
TIMEOUT.
135 /