Oki C310dn Maintenance Manual page 140

Oki Data CONFIDENTIAL
Atten-
Online
Operator panel display tion
lamp
lamp
CHECK UNDER BELT Off Blink Indicates a paper jam occurred near the
%ERRCODE%:PAPER
JAM
CHECK UNDER BELT Off Blink Indicates a paper jam occurred near the
%ERRCODE%:PAPER
JAM
REPLACE IMAGE DRUM Off Blink Notifies the end of the life of an image
UNIT
353:DRUM UNIT LIFE
REPLACE IMAGE DRUM Off Blink Notifies the end of the life of an image
UNIT
563:DRUM UNIT LIFE
REPLACE FUSER Off Blink Notifies the end of the life of the fuser.
%ERRCODE%:FUSER
LIFE
REPLACE BELT Off Blink Notifies the end of the life of the transfer
%ERRCODE%:BELT LIFE
REPLACE BELT Off Blink Indicates the printer is full of waste toner.
%ERRCODE%:BELT LIFE
44346001TH Rev.1
Description
duplex unit.
Error 370 : Duplex Reversal
Error 371 : Duplex Input
duplex unit.
Error 372 : Duplex Misfeed
drum (an alarm). Cover opening and
closing puts the printer into a warning
state.
drum (an alarm). This display is provided
until the image drum is replaced.
This is an error that indicates a counter
shows the end of the fuser life is
reached. The printer stops printing with
the error. Cover opening and closing
puts the printer into a warning state.
belt. This is an error that indicates a
counter shows the end of the belt life is
reached. The printer stops printing with
the error. Cover opening and closing
puts the printer into a warning state.
Cover opening and closing puts the
printer into a warning state only once,
and then after printing 500 pages, the
printer has an error.
Code
Operator panel display
nnnnnn
Error CHECK TONER
CARTRIDGE
370
%ERRCODE%:%COLOR%
371
IMPROPER CARTRIDGE
LOCK POSITION
Error
372
CHECK IMAGE DRUM
UNIT
Error
343:DRUM UNIT
353
MISSING
CHECK FUSER
%ERRCODE%:FUSER
Error
MISSING
563
Error CHECK BELT
354
%ERRCODE%:BELT
MISSING
CLOSE COVER
%ERRCODE%:COVER
OPEN
Error
WAIT A MOMENT
355
DATA RECEIVE
WAIT A MOMENT
DATA RECEIVED OK
CHECK DATA
Error
REC DATA ERROR
356
<%DLCODE%>
Atten-
Online
tion Description
lamp
lamp
Off Blink Indicates the lever of a toner cartridge is
not locked.
Error 544 : Y
Error 545 : M
Error 546 : C
Error 547 : K
Off Blink Indicates an image drum is not properly
installed.
Off Blink Indicates the fuser is not properly
installed. (The error may occur when the
printer is not more than 0ºC. When then
the temperature of the printer has risen,
turn off and on the printer.)
Off Blink CHECK BELT
%ERRCODE%:BELT MISSING
Off Blink Indicates a cover is a cover is open
Error 310 : Top cover
Off Blink Indicates update NIC program data is
being received.
Off Off Indicates reception of update NIC
program data is complete.
Off On Indicates that the printer has an error
during reception processing of update
NIC program data.
%DLCODE%
1: size error.
2: checksum error.
3: printer model number error.
4: module interface version error.
5: FAT version error.
7. TROUBLESHOOTING
Code
nnnnnn
Error
544
545
546
547
Error
343
Error
320
Error
330
Error
310
Error
Error
Error
140 /