44346001Th Rev.1 - Oki C310dn Maintenance Manual

7. TROUBLESHOOTING
Oki Data CONFIDENTIAL
Solution: Set the encryption strength to Weak.
Changing the encryption strength using Telnet
Note! Telnet cannot be used by default. To change the encryption strength, Enable
must be specified for Telnet.
Enter "Telnet <printer IP address>" at the command prompt (DOS prompt) and press
the return key.
Establish connection using an administrator user name and a password.
Select [4: Security Config], [5: Cipher (SSL/TLS)] and [2: Cipher Strength], and change
the cipher strength as desired (1: Strong, 2: Standard, 3: Weak).
1 /

44346001TH Rev.1