Adjustment At Part Replacement - Oki B431L6 Maintenance Manual

Oki Data CONFIDENTIAL

4.2 Adjustment at part replacement

Adjustment is necessary while replacing the following part.
Replacing part
Main PCB board
4.2.1 EEPROM data upload / download method
In the case of replacing the Print Board of Controller, copy the old EEPROM content to the new
EEPROM of new board and then save the customer setting. To operate this, use Maintenance Utility.
About the operating method of Maintenance Utility, refer to Maintenance Utility Operating Specification.
Maintenance Utility is designed for working place engineer use only. It is not released to the end user.
Refer to 2.4.1.1.9 of Maintenance Utility Manual.
44983601TH Rev.1
Adjustment
EEPROM data upload / download
4. ADJUSTMENT
4-28 /