ESIE02–01
5.3
Indoor Unit: Checking the Power Supply Wave Form
Checking
To check the power supply wave form, proceed as follows:
Step
1
2
3
4
Part 3 – Troubleshooting
Action
Measure the power supply wave form between pin 1 and 3 of X1M for the outdoor units or
between pin 1 and 3 of X2M for the indoor units.
Check whether the power supply wave form is a sine wave:
Check whether there is wave form disturbance near the zero cross:
Adjust the supply voltage.
Additional Checks for Troubleshooting
1
3 3
4
5
3–67