Trigger:sequence2:Source Trigger:acquire:source; Trigger:sequence1:Define Trigger:sequence2:Define - Agilent Technologies 66312A Programming Manual

TRIGger:SEQuence2:SOURce
TRIGger:ACQuire:SOURce
Agilent 66312A, 66332A Only
These commands select the trigger source for measurement triggers as follows:
GPIB device, *TRG, or <GET> (Group Execute Trigger)
BUS
trigger is generated internally when the measured waveform crosses the trigger level
INTernal
with the selected slope.
Command Syntax
Parameters
*RST Value
Examples
Query Syntax
Returned Parameters
TRIGger:SEQuence1:DEFine
TRIGger:SEQuence2:DEFine
TRIGger:SEQuence2:DEFine applies to Agilent 66312A, 66332A Only
These commands define the names that are aliased to trigger sequences 1 and 2. The command accepts
only ACQuire for sequence 2 and TRANsient for sequence 1 as predefined names. The query allows the
user to query the instrument names aliased to sequences 1 and 2.
Command Syntax
Parameters
Examples
Query Syntax
Returned Parameters
Related Commands
*TRG
This common command generates a trigger when the trigger subsystem has BUS selected as its source.
The command has the same affect as the Group Execute Trigger (<GET>) command.
In RS-232 mode, this command emmulates some of the functionality of the IEEE-488 Group Execute
Trigger command.
Command Syntax
Parameters
Related Commands
TRIGger:SEQuence2:SOURce<source>
TRIGger:ACQuire:SOURce<source>
BUS | INTernal
INTernal
TRIG:ACQ:SOUR BUS
TRIGger:SEQuence2:SOURce?
TRIGger:ACQuire:SOURce?
<CRD>
TRIGger:SEQuence1:DEFine TRANsient
TRIGger:SEQuence2:DEFine ACQuire
TRANsient, ACQuire
SEQ1:DEF ACQ
TRIGger:SEQuence1:DEFine?
TRIGger:SEQuence2:DEFine?
<CRD>
TRIG:SEQ2:ACQ TRIG:SEQ1:TRAN
*TRG
None
ABOR INIT TRIG[:IMM]
SEQ2:DEF TRAN
<GET>
Language Dictionary - 4
79