(17) "Back Up Completed" is displayed on the LCD screen when the backup has been properly com-
pleted.
(18) Turn the power OFF and remove the USB storage device.
<SRAM Data Backup>
(19) Connect the USB storage device to the USB connector (host) on the SYS board.
(20) Turn the power ON while pressing the [5] and [9] button simultaneously.
The screen to select the backup/restore items is displayed.
Note:
Note:
After the item is selected with the digital keys, displaying the next menu may take a long time.
e-STUDIO520/600/720/850 DATA CLONING with USB STORAGE DEVICE
Fig.9-10
Fig.9-11
9 - 8
05/11
March 2005 © TOSHIBA TEC