Toshiba e-studio600 Service Manual page 290

[ 2 ] Operational screen
1) Main screen
1
2
Displaying of the main unit name
1
Back to the PM support mode activation screen
2
Moving to the clear screen to clear the selected unit counters (
3
unit (parts) counters belonging to that unit
When the unit is not selected, all counters are cleared.
Moving to the sub screen of the selected unit
4
Moving to the next/previous page
5
Displaying of the present number of output pages counts (x 1,000)
6
When there are differences among the sub units (parts), "_" is displayed and "CHECK SUB-
UNIT" is displayed at the top
"*" is displayed next to the present number when the number of output pages counts has
exceeded its PM standard number.
Displaying of the standard number of output pages counts (x 1,000) to replace the unit parts
7
Displaying of the present drive counts (x 1,000)
8
"*" is displayed next to the present number when the number of drive counts has exceeded its
PM standard number.
Displaying of the standard number of drive counts (x 1,000) to replace the unit parts
9
Displaying of the number of output pages counts (Cpy.), drive counts (Cnt.) and previous
10
replacement date (Chg.) for a chosen unit.
When the replacement date for the sub unit is different, press the [SUB UNIT] button to move
to the sub screen and see each information, otherwise information is not displayed
e-STUDIO520/600/720/850 PREVENTIVE MAINTENANCE (PM)
3 4
10
5 6 7
Fig.4-2
4 - 2
8
and ), including all sub
8
6
March 2005 © TOSHIBA TEC
9