Toshiba e-studio600 Service Manual page 15

Paper size
B4, FOLIO, Top side
LG, discharging
COMPUTER
Back side
discharging
A3, LD Top side
discharging
Back side
discharging
*1 : The 3rd drawer and 4th drawer are standard equipments for NAD, SAD and TWD (e-STUDIO600/
720) versions.
*2 : The Tandem LCF is a standard equipment for ASD, ASU, AUD, MJD, CND, TWD (e-STUDIO850)
and KRD versions. Only A4/LT can be used for the Tandem LCF.
*3 : Only A4, B5 and LT can be used for the Option LCF.
* Each copy speed has been measured in the Continuous Copy Mode, using single-sided originals
placed on the original glass manually.
* Accuracy: Within ±2 sheets (Bypass feed) / Within ±1 sheet (Other paper sources)
* A hyphen ("-") indicates that the combination is invalid for the subject paper source.
* Values may vary depending on its use condition and environment.
* When the RADF is used, each copy speed per minute of e-STUDIO520/600/720/850 has reached
52/60/72/85 sheets. These copy speeds can be realized only in the following conditions.
• Original: A4/LT / 1 sheet
• Copy mode: A4/LT / Plain paper / Automatic Paper Selection - OFF / Automatic Copy Density -
OFF
• Number of copy set: 52 or more / 60 or more / 72 or more / 85 or more
• Reproduction ratio: 100%
• Copy speed for thick paper (Copies/min.)
Thick 1 (Paper weight: From over 80 g/m² (21.3 lb. Bond) to 105 g/m² (28 lb. Bond))
Paper source: Drawers / Tandem LCF / Option LCF
A4, B5, A5-R, Top side
LT, ST-R discharging
Back side
discharging
A4-R, B5-R, Top side
LT-R discharging
Back side
discharging
B4, FOLIO, Top side
LG, discharging
COMPUTER
Back side
discharging
A3, LD Top side
discharging
Back side
discharging
* Tandem LCF - A4/LT only / Option LCF -A4/B5/LT only
* Tolerance: Within -0.5 from +1
Thick 1 (Paper weight: From over 80 g/m² (21.3 lb. Bond) to 105 g/m² (28 lb. Bond))
March 2005 © TOSHIBA TEC
Drawer
Tandem
LCF(*2)
3rd 4th
1st 2nd
(*1) (*1)
52 52 52 52
45 45 45 45
43 43 43 43
37 37 37 37
e-STUDIO520 e-STUDIO600
52 60
52 60
42 46
42 46
37 41
37 38
33 36
31 32
e-STUDIO520/600/720/850 SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
1 - 3
Bypass feed
Size Size not
specified specified
- 38
- 38
- 34
- 34
e-STUDIO720
72
72
52
50
44
41
37
34
Option
LCF(*3)
34 -
34 -
34 -
34 -
e-STUDIO850
85
85
61
56
52
45
43
37
1