Toshiba e-studio600 Service Manual page 543

2) Touch Panel Setting
Each item is set from the Auto Supply Order screen on the touch panel.
Entering the password and customer information is required because the setting is made from the
ADMIN screen. Setting it with the administrator is a must.
- Basic setting
[ADMIN] > [SERVICE] > [SUPPLY ORDER SETUP] > [ORDER INFORMATION]
AUTO SUPPLY ORDER
FAX NUMBER
E-MAIL
CUSTOMER
NAME
TEL NUMBER
E-MAIL
ADDRESS
SUPPLIER
NAME
ADDRESS
SERVICE TECHNICIAN
NUMBER
NAME
TEL NUMBER
E-MAIL
*1 HTTP has not been supported yet.
*2 Even when "FAX" is selected, the order is not placed without entering the FAX number.
*3 Even when "MAIL" is selected, the order is not placed without entering the E-mail address.
- Detailed setting for the order
[ADMIN] > [SERVICE] > [SUPPLY ORDER SETUP] > [TONER ORDERING
***** TONER ORDER
PART NUMBER
CONDITION
QUANTITY
AUTO ORDER
March 2005 © TOSHIBA TEC
Ordered by: [FAX], [MAIL], [HTTP] (*1)
FAX number of supplier (*2)
E-mail address of supplier (*3)
Customer information
Supplier information
Service technician information
Order information (TONER/USED TONER CONTAINER)
Part number to be ordered
The number of conditions (*1)
The quantity to be ordered
ON/OFF setting of order for each part
8 - 3
e-STUDIO520/600/720/850 REMOTE SERVICE
8