Toshiba e-studio600 Service Manual page 28

Error code Classification
E380 Paper transport jam
E3C0
E3C1
E3D0
E3E0
E3F0
E410 Cover open jam
E440
E450
E460
E470
e-STUDIO520/600/720/850 ERROR CODE AND SELF-DIAGNOSTIC MODE
Contents
4th drawer transport jam (paper not reaching 4th
drawer transport sensor): Paper which passed the
4th drawer feed sensor does not reach the 4th
drawer transport sensor during the feeding at the
4th drawer.
Tandem LCF transport jam (paper not reaching reg-
istration sensor): Paper which has passed the 1st
transport sensor does not reach the registration
sensor during the feeding at the Tandem LCF.
Tandem LCF transport jam (paper not reaching
intermediate transport sensor): Paper which has
passed the 1st transport sensor does not reach the
intermediate transport sensor during the feeding at
the Tandem LCF.
Tandem LCF transport jam (paper not reaching 1st
drawer transport sensor): Paper which has passed
the 2nd drawer transport sensor does not reach the
1st drawer transport sensor during the feeding at
the Tandem LCF.
Tandem LCF transport jam (paper not reaching 2nd
transport sensor): Paper which has passed the 3rd
drawer / Tandem LCF transport sensor does not
reach the 2nd drawer transport sensor during the
feeding at the Tandem LCF.
Tandem LCF transport jam (paper not reaching 3rd
drawer / Tandem LCF transport sensor): Paper
which has passed the 3rd drawer / Tandem LCF
feed sensor does not reach the 3rd drawer / Tan-
dem LCF transport sensor during the feeding at the
Tandem LCF.
Front cover open jam: The front cover has opened
during printing.
Right lower cover (feed cover) open jam: The feed
cover has opened during printing.
Option LCF side cover open jam: The side cover of
the Option LCF has opened during printing.
Right center cover (bypass feed unit cover) open
jam: The bypass feed unit cover has opened during
printing.
Left lower cover (exit cover) open jam: The exit
cover has opened during printing.
2 - 4
Troubleshooting
Ch.5.1.1
Ch.5.1.1
Ch.5.1.1
Ch.5.1.1
Ch.5.1.1
Ch.5.1.1
Ch.5.1.3
Ch.5.1.3
Ch.5.1.3
Ch.5.1.3
Ch.5.1.3
March 2005 © TOSHIBA TEC