Toshiba e-studio600 Service Manual page 286

• The center of the printed image shifts to the rear side:
Move the adjustment board to the rear side (Arrow (A) in the upper figure).
Note: Note:
After the tray position adjustment, re-adjust the front cover position. Adjustment: loosen 4
screws and slide the front cover to adjust the gap between the front and upper cover, and the
front and right cover to 3 mm respectively.
e-STUDIO520/600/720/850 ADJUSTMENT
Feeding direction
Fig.3-94
Front cover
Fig.3-95
3 - 86
[ Rear ]
Center
[ Front ]
March 2005 © TOSHIBA TEC