Toshiba e-studio600 Service Manual page 381

[EC20] Inserter reverse path delay jam-1
[EC30] Inserter reverse path stop jam-1
[EC40] Inserter reverse path delay jam-2
[EC50] Inserter reverse path stop jam-2
Are the transport roller and reverse roller tainted?
YES Æ Clean up the rollers.
È
NO
Is the harness between the inserter control board and reverse path sensor is open-cir-
cuited?
YES Æ Replace the harness.
È
NO
Is the reverse path sensor working improperly?
YES Æ Replace the reverse path sensor.
È
NO
Replace the inserter control board.
[EC60] Inserter transport delay jam-1
[EC70] Inserter transport stop jam-1
[EC80] Inserter transport delay jam-2
[EC90] Inserter transport stop jam-2
Is the transport roller tainted?
YES Æ Clean up the roller.
È
NO
Is the harness between the inserter control board and transport sensor is open-circuited?
YES Æ Replace the harness.
È
NO
Is the transport sensor working impropely?
YES Æ Replace the transport sensor.
È
NO
Replace the inserter control board.
March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 TROUBLESHOOTING
5 - 53
5