Capturing A Call Sign - Icom ID-51A Basic Instructions

■ Capturing a call sign

After you receive a repeater's signal, the calling station's call
sign can be captured by touching the Call Sign Capture key
( ) for 1 second. Then you can quickly and easily reply
to the call.
While receiving
What is the Call Sign Capture key?
✓
Touching the Call Sign Capture key for 1 second sets the last
received station's call sign as a temporary destination, and
makes replying quick and easy.
The Call Sign Capture key is here!
1.
Hold down
• After releasing, beeps sound, and
the station call sign is announced.
When receiving a
call from "JG3LUK."
D-STAR OPERATION
Set the received call sign to the destination
for 1 second.
Beeps
Blinks after select-
ing a call sign.
Beeps
NOTE:
• If you want to select another call sign in the RX history,
rotate [DIAL] while holding down
• When a received signal is weak, DR scanning or the pow-
er save is ON, the call sign may not be received correctly.
In that case, "--------" appears, an error beep sounds, and
a quick reply call cannot be made.
☞
6
While holding down .
After releasing .
.
Continued on the next page
6
54