3.
Check whether you can access the repeater
Hold down [PTT] for approxi-
q
mately 1 second to access
the repeater.
If you get a reply call, or "UR?"
w
appears on the LCD within 3
seconds, your signal reached
your access repeater and
your call was successfully
sent from your destination
repeater.
Successfully sent!
NOTE: See page 60 for status indications after a reply is
received.
■ Using the RX history
When a DV call is received, the call signs of the caller, the
called station and the called station's access repeater are
stored in the RX history file.
Up to 50 calls can be stored.
This section describes how to view the RX history screen and
how to save the call sign to memory.
Transmitting
D-STAR OPERATION
When receiving a call from "JM1ZLK."
The S-meter appears
and the caller's call
sign is displayed.
Continued on the next page
☞
6
6
50