Selecting The Memory Channel; Memory Channel Operation - Icom ID-51A Basic Instructions

■ Selecting the Memory channel

In the memory mode, you can select the programmend mem-
ory channels by rotating [DIAL].
Push [M/CALL] one or
q
more times to enter the Mem-
ory mode.
• " " appears when the Mem-
ory mode is selected.
• Push [M/CALL] again
to select the Memory mode
or Weather channel mode*.
The Memory mode, Call chan-
nel mode or Weather channel
mode* are alternately selected.
* Appears only for the U.S.A. ver-
sion transceivers.
Rotate [DIAL] to select a de-
w
sired memory channel.
• Memory channels:
"000" ~ "499"
• Scan edge channels:
"0A/0B" ~ "24A/24B"
• Only programmed memory
channels can be selected.
• See previous page for memory
programming details.
Example: Selecting the Memory channel 7
Rotate [DIAL] to select channel 7.
Push .
Push [CLR]
e
Memory mode.
Appears

MEMORY CHANNEL OPERATION

to exit the
5
5
42