Memory Channel Operation; Memory Channel Programming - Icom ID-51A Basic Instructions

5

MEMORY CHANNEL OPERATION

■ Memory channel programming

The Memory mode is useful to quickly select often-used re-
peaters.
This section describes the basic channel programming.
See the Advanced Instructions for details.
Example: Programming 146.030 MHz into memory channel
11 (a blank channel).
Push [V/MHz]
q
the VFO mode.
Rotate [DIAL] to set a fre-
w
quency to 146.030 MHz.
Hold down [S.MW]
e
1 second to enter the Select
Memory write mode.
• 1 short and 1 long beep sound.
• The memory channel number
blinks, and memory contents
are displayed.
41
to select
Hold down
for
Rotate [DIAL] to select the
r
channel 11.
• Select Call channels (C0 to C3)
to program into a call chan-
nel, VFO to program into VFO
or scan edge channels (0A/0B
to 24A/24B) to program into a
scan channel.
Hold down [S.MW]
t
second to program, and then
return to the VFO mode.
• 3 beeps sound.
• Before returning to the VFO
mode, the programmed mem-
for 1 sec.
ory contents are briefly dis-
played.
Hold down
for 1 sec.
for 1