Menu Items And Their Details - Icom ID-51A Basic Instructions

■ Menu items and their details

This topic describes the Menu items and their details.
DUP/TONE...
Settings to access repeaters.
Offset Freq
Sets the frequency offset for duplex (repeater) operation.
Repeater Tone
Selects a tone frequency used to access the repeaters.
TSQL Freq
Selects a tone frequency for the Tone squelch or the pock-
et beep function.
Tone Burst
Turns the Tone Burst function ON or OFF.
This function is used to suppress the squelch tail noise
heard from the transceiver's speaker.
DTCS Code
Selects a DTCS (both encoder/decoder) code for DTCS
squelch or the pocket beep function.
DTCS Polarity
Selects the DTCS polarity for the DTCS squelch or the
pocket beep function.
Digital Code
Selects a digital code for the Digital Code squelch func-
tion.
Scan
Set scan options.
Pause Timer
Selects the scan pause time. When receiving signals, the
scan pauses according to the scan pause timer.
Resume Timer
Selects the scan resume time from a pause after the re-
ceived signal disappears.
Temporary Skip Timer
Selects the Temporary Skip Time. When the time is set,
specified frequencies are skipped for this period during a
scan.
Program Skip
Turns the Program Skip Scan function ON or OFF for a
VFO mode scan.
Bank Link
Selects banks to be scanned during a Bank Link Scan.
Program Link
Sets the link function for the program scan edge channels.
See the Advanced Instructions for details of the preset values.
3
MENU SCREEN
3
20