Unique Functions; Qso Recording Function; Auto Position Reply Function; Voice Tx Function - Icom ID-51A Basic Instructions

UNIqUE FUNCTIONS

This section introduces unique functions built into the ID-
51A/E.
• See the PDF type Advanced Instructions's for more details.
1

QSO Recording function

You can record a QSO audio in the MAIN band.
You can select recording only the receive audio or both the
transmit and receive audio.
You can also store and view the QSO/RX log file.
• The log file stores following contents:
RX Frequency, Operating mode (DV is fixed), Call sign of the caller
station, Note after the call sign, Call sign of the called station, Ac-
cess repeater call sign of the caller station or the gateway repeater
call sign of your local area repeater, Access repeater call sign of
the called station, Message included in the received call (up to 20
characters), and so on.
• See page 72 or the PDF type Advanced Instructions's Section 11
for details.
NOTE: This function requires a microSD card.
xi

Auto Position Reply function

2
When you receive a call addressed to your own call sign, but
are in a situation that makes it difficult to operate the trans-
ceiver, this function automatically replies with your own call
sign and transmits your position.
• See the PDF type Advanced Instructions's Section 9 for details.
w Your position is auto-
matically transmitted.
q A call addressed to
your own call sign.
Your station

Voice TX function

3
You can transmit recorded audio once or repeatedly, which is
useful for D-STAR events.
• See the PDF type Advanced Instructions's Section 17 for details.
This is JA3YUA
JA3YUA
NOTE: This function requires a microSD card.
Destination
e After receiving, the
(ID-51)
screen shows the
position.
Repeat Voice TX
waiting screen