Selecting The Mode And The Dr Function - Icom ID-51A Basic Instructions

Selecting the Mode and the DR function

■
• VFO mode
The VFO mode is used to set the desired frequency.
• Memory mode
The Memory mode is used for operation on Memory chan-
nels, which store programmed frequencies and other param-
eters.
• Call channel mode
Call channels are used for quick recall of most-often used
frequencies.
• Weather channel mode*
Weather channels are used for monitoring weather channels
from the NOAA (National Oceanographic and Atmospheric
Administration) broadcasts.
D VFO mode
Push [V/MHz] .
q
• Push [V/MHz] selects the 1 MHz or 10 MHz Quick Tuning
function step, or turns it OFF.
Rotate [DIAL] to set the operating frequency.
w
VFO mode
D Memory/Call channel/Weather channel* mode
In the VFO mode, push [M/CALL]
q
ory mode.
• " " and the selected Memory channel number appear.
Push [M/CALL] again to select the Call channel mode,
w
and then push again to select the Weather channel mode.
• The Memory mode, Call channel mode or Weather channel
mode* are alternately selected.
• In the Call channel mode, the selected Call channel number
("C0" to "C3") appears.
• In the Weather channel mode*, the selected weather channel
number ("WX-01" to "WX-10") appears.
Rotate [DIAL] to select a desired channel.
e
*Appears in only the U.S.A. version transceivers.
Memory mode
Weather channel mode*
BASIC OPERATION
to select the Mem-
Call channel mode
4
4
36