Icom ID-51A Basic Instructions page 34

3
MENU SCREEN
Menu items and their details
■
Root item "Scan" (Continued)
Voice Memo
Set the TX/RX voice recording options.
QSO Recorder
Set QSO recorder options.
<<REC Start>>*
Starts recording the received signal audio.
Play Files*
Plays or deletes the recorded audio.
Recorder Set
REC Mode
Selects whether or not to record the TX audio.
RX REC Condition
Selects whether or not the squelch status affects the
RX voice audio recording.
File Split
Selects whether or not to automatically create a new
file if transmission and reception, or squelch status
(open and close) is switched.
PTT Auto REC
Turns the PTT Automatic Recording function ON or OFF.
Player Set
Skip Time
Sets the Skip time to rewind or forward the recorded
audio when you push the fast-rewind or fast-forward
key during playback.
*
Be sure to insert a microSD card into the transceiver before select-
ing these items.
21
Voice Recorder
Set Voice recorder options.
Record*
Starts recording the microphone audio.
Play Files*
Plays or deletes the recorded audio.
Recorder Set
Sets the microphone sensitivity to suit your needs.
Player Set
Sets the Skip time to rewind or forward the recorded au-
dio when you push the fast-rewind or fast-forward key
during playback.
DV Auto Reply*
Records a voice audio to use for the Auto Reply function
in the DV mode.
Voice TX
Set microphone voice recording options.
Record*
Starts recording the microphone audio.
TX Set
Repeat Time
Sets the repeat interval. The transceiver repeatedly trans-
mits the recorded voice audio at this interval.
TX Monitor
The TX Monitor function outputs the TX voice audio from
the speaker during voice transmission.