Resetting; Partial Reset - Icom ID-51A Basic Instructions

■ Resetting

The display may occasionally display erroneous information.
This may be caused externally by static electricity or by other
factors. If this problem occurs, turn OFF power. After waiting
a few seconds, turn ON power again. If the problem persists,
perform a Partial reset or an All reset.
BE CAREFUL! An All reset clears all programming and
returns all settings to their factory defaults. See the PDF
type Advanced Instructions for more details.
D Partial reset
q Push [MENU] to enter the
Menu screen.
Push D-pad( ) to select "Par-
w
tial Reset," and then push D-
pad(Ent).
D-pad
(Ent)
(�)
( Others > Reset > Partial Reset)
• If the item is not displayed, push
D-pad() one or more times to se-
lect the page.
A Partial reset resets operating settings to their default values
(VFO frequency, VFO settings, menu contents) without clear-
ing the items below:
• Memory channel contents
• Call channel contents
• Message data
• GPS Memory contents
• BC Radio Memory
The "Partial Reset?" dialog
e
appears.
Push D-pad(
r
and then push D-pad(Ent).
• The transceiver displays "PAR-
Go to step r
RESETTING
• Scan Edge contents
• Call sign memories
• DTMF memory contents
• Repeater list
) to select "Yes,"
TIAL RESET," then the partial
reset is completed.
Shows "PARTIAL RESET"
9
Default screen
9
80