Enter Your Call Sign Into The Transceiver - Icom ID-51A Basic Instructions

2
STARTING INITIAL SETUP

■ Enter your call sign into the transceiver

You can enter up to six MY call signs, in [MY1] through [MY6].
1. Displays the MY Call Sign edit screen
Example: Enter "JA3YUA" as your own call sign into the MY
call sign memory [MY1].
Push [MENU]
q
• The MENU screen is displayed.
Push D-pad( ) to select the
w
root item "My Station," and
then push D-pad(Ent).
• If the item is not displayed, push
D-pad() one or more times to
select the page.
D-pad
(Ent)
(�)
Push D-pad( ) to select "My
e
Call Sign," and then push D-
pad(Ent).
• The MY CALL SIGN screen is
displayed.
Push D-pad( ) to select MY
r
call sign memory channel "1"
([MY1]).
13
.
MENU screen
Go to step r
t Push [QUICK] , and then
push D-pad() to select "Edit."
Then, push D-pad(Ent).
• Enters the call sign edit mode.
2. Enter the call sign
Rotate [DIAL] to select the
y
first digit. (Example: J)
• A to Z, 0 to 9, / and (Space) are
selectable.
• Move cursor: Push D-pad().
• Delete: Push [CLR] .
• Insert: Move cursor, then rotate
[DIAL].
• Rotate [DIAL] counterclockwise
to enter a space.
Push D-pad() to move the
u
cursor to the second digit.
NOTE: Your MY CALL SIGN
must match the call sign
registered on a gateway re-
peater. (p. 15)
Edit mode
Go to step u