Capturing A Call Sign - Icom ID-31E PLUS Basic Manual

D-STAR OPERATION

■ Capturing a call sign

After you receive a signal, the calling station's call sign can
be captured by holding down the Call Sign Capture key
([RX→CS]) for 1 second. After releasing, you can quickly
and easily reply to the call.
What is the Call Sign Capture key?
Holding down the Call Sign Capture key for 1 second
sets the last received station's call sign as a temporary
destination, and makes replying quick and easy.
Step 1: Set the received call sign to "TO" (Destination).
While receiving, hold down [RX→CS] for 1 second.
• After releasing the key, the transceiver announces the station call
sign and the call sign is captured.
While holding down
47
D-STAR GUIDE
L
• If you want to select another call sign in the RX History, rotate
• You can change the setting of the [RX→CS] key on the MENU
• When a received signal is weak, or during a DV scan, the call sign
• When RX > CS SPEECH is set to "OFF," the transceiver does not
Step 2: Hold down [PTT] to transmit.
• The TX/RX indicator lights red while transmitting.
←Captured!
After releasing
L Push [RX→CS] to return to the previous call sign setting.
Information
[DIAL] while holding down [RX→CS].
screen. If [RX→CS] Key is set to "RX > CS List," the received call
sign is not captured. The RX History list is displayed instead.
(MENU > DV Set > [RX>CS] Key)
may not be correctly received. In that case, you cannot capture
the call sign.
announce the call sign.
(MENU > SPEECH > RX > CS SPEECH)