D-STAR OPERATION
■ Capturing a call sign
After you receive a signal, the calling station's call sign can
be captured by touching the Call Sign Capture key
([RX→CS]) for 1 second. After releasing, you can quickly
and easily reply to the call.
L If you want to select another call sign in the RX history, push
[RX→CS], then rotate [DIAL].
What is the Call Sign Capture key?
Touching the Call Sign Capture key for 1 second sets the
last received station's call sign as a temporary destination,
and makes replying quick and easy.
While receiving
When receiving a call from "JG3LUK."
17
D-STAR GUIDE
The Call Sign
Capture key is here!
Step 1: Set the received call sign to "TO" (Destination)
Hold down [RX→CS] for 1 second.
• Announces the station call sign.
L When a received signal is weak or during a DV scan, the call
sign may not be correctly received. In that case, you cannot
capture the call sign.
Step 2: Hold down [PTT] to transmit
• Displays
while transmitting.
L Push [RX→CS] to return to the previous call sign setting.