Icom ID-51A Basic Instructions page 76

6
D-STAR OPERATION
Reflector operation
■
D Linking to a reflector (Continued)
Push D-pad( ) to select
r
"Link to Reflector," and then
push D-pad(Ent).
Push D-pad( ) to select "Di-
t
rect Input," and then push D-
pad(Ent).
Push D-pad( ) to select the
y
reflector number.
(Example: 010)
Push D-pad( ) to move the
u
cursor.
Push D-pad( ) to select
i
module letter. (Example: B).
Push D-pad(Ent).
o
• The transceiver returns to the
DR screen.
• "Link to Reflector" and "REF-
010BL" are displayed in "TO."
!0 Hold down [PTT] to link to the
reflector.
• The TX/RX indicator lights red.
63
Using the TX History
The TX History stores the up to 5 reflectors that your access
repeater linked to before.
Example: Select the "REF002AL" in the TX History.
Hold down for 1 sec-
q
ond.
Push D-pad( ) to select "TO,"
w
and then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select
e
"Reflector," and then push D-
pad(Ent).
• The "REFLECTOR" screen ap-
pears.
Go to step r