End of Submenu (NEXT) to Enter STATUS
1. Press the NEXT key to leave the submenu and show following
screen.
2. Press PREVIOUS to page back through the submenu.
ECONOMIZER STATUS SUBMENU SCREENS
Economizer Status Submenu
Press ENTER to View Data in This Submenu
1. Pressing the NEXT key will bypass the next section.
Air Economizing: ENABLED
Outside Air Damper Pos:
1. Press the NEXT key until the following screen is displayed.
Active Outside Air Enthalpy
ECEM Return Air Enthalpy
1. Press the NEXT key until the following screen is displayed.
Active Outside Air Temperature
ECEM Return Air Temperature
1. Press the NEXT key until the following screen is displayed. (if
applicable)
Active Outside Air Humidity
ECEM Return Air Humidity
1. Press the NEXT key until the following screen is displayed.
End of Submenu (NEXT) to Enter STATUS
1. Press the NEXT key to leave the submenu and show following
screen.
2. Press PREVIOUS to page back through the submenu.
RT-SVP04F-EN
10%
29.5 BTU/LB
34.0 BTU/LB
86.0 F
78.0 F
30 %
62 %
System Operating Status
Used With: All Units when an
economizer is installed
Used With: All units when an
Economizer is installed.
Possible Values: Economizing:
ENABLED/DISABLED Outside Air:
Opening To/Closing To 0 - 100%
Note: Enabled = OK to economize
Disabled = Not OK to
economize
Used With: All Units when an
Economizer is installed. "RA Enth" is
displayed if Comparative Enthalpy or
Energy Recovery is installed.
Possible Values: 10 to 35 BTU/LB
Used With: All Units when an
Economizer is installed. "RA Temp"
is displayed if Comparative Enthalpy
or Energy Recovery is installed.
Used With: All Units when an
Economizer is installed. "RA
Humidity" is displayed if
Comparative Enthalpy or Energy
Recovery is installed.
Possible Values: 10 to 90 %
35