Trane IntelliPak I Programming, Troubleshooting Manual page 33

Condenser Sump Pump Relay Command:
Condenser Sump Pump Proving:
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
3. Press the NEXT key until the following screen is displayed.
(if applicable)
Condenser Water Valve Relay Ckt1:
Condenser Water Valve Ckt1:
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
3. Press the NEXT key until the following screen is displayed.
(if applicable)
Condenser Water Valve Relay Ckt2:
Condenser Water Valve Ckt2:
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
3. Press the NEXT key until the following screen is displayed.
(if applicable)
Condenser Sump Fill Relay:
Condenser Sump Fill Valve:
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
3. Press the NEXT key until the following screen is displayed.
(if applicable)
Condenser Sump Drain Relay:
Condenser Sump Drain Valve:
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
3. Press the NEXT key until the following screen is displayed.
(if applicable)
Note: Valve position with Relay ON is configurable based on if need
to hold water in the sump or drain it on power loss. See
Installation and Operations Manual.
RT-SVP04F-EN
ON
FLOW
OFF
OPEN
ON
CLOSED
OFF
OPEN
ON
CLOSED
System Operating Status
Used With: All IntelliPak II units
with water-cooled condensers
installed.
Possible Values: Sump Pump
Relay: ON, OFF; Sump Proving:
FLOW, NO FLOW
Used With: All IntelliPak II units
with water-cooled condensers
installed.
Possible Values: Water Valve
Relay: ON, OFF; Water Valve:
CLOSED, OPEN
Used With: All IntelliPak II units
with water-cooled condensers
installed.
Possible Values: Water Valve
Relay: ON, OFF; Water Valve:
CLOSED, OPEN
Used With: All IntelliPak II units
with water-cooled condensers
installed.
Possible Values: Sump Fill Relay:
ON, OFF; Sump Fill Valve: CLOSED,
OPEN
Used With: All IntelliPak II units
with water-cooled condensers
installed.
Possible Values: Sump Drain
Relay: ON, OFF; Sump Drain Valve:
CLOSED, OPEN
33