Trane IntelliPak I Programming, Troubleshooting Manual page 49

RTM Outside Air Humidity
ECEM Return Air humidity
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
3. Press the + (Plus) key while viewing any screen to add that
screen to the custom menu. Refer to the custom menu for the
creation and maintenance of customized menus.
4. Press the NEXT key until the following screen is displayed.
(if applicable)
RTM Space Humidity
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
3. Press the + (Plus) key while viewing any screen to add that
screen to the custom menu. Refer to the custom menu for the
creation and maintenance of customized menus.
4. Press the NEXT key until the following screen is displayed.
(if applicable)
ECEM Space Pressure Input
1. Press the NEXT key until the following screen is displayed. (if applicable)
VCM Outside Air Flow Input
1. Press the NEXT key until the following screen is displayed.
VCM CO Level Input
2
1. Press the NEXT key until the following screen is displayed
RT-SVP04F-EN
55%
46%
10%
0.08 IWC
350.0 CCFM
1512 PPM
System Operating Status
Used With: All units with AS
Economizer installed.
"RA Humidity" shown only if
Comparative Enthalpy is installed
Possible Values: 10 - 90%
Used With: All units with
DeHumidification or Humidification
options installed.
Possible Values: 10 - 90%
Used With: All Units when Power
Exhaust with Statitrac is installed or
Return Fan with Statitrac installed.
Possible Values: -0.67 to 0.67 IWC
Used With: All Units when VCM is
installed
Possible Values: 0 to Max Unit Air
Flow Refer to the table in the
SETPOINT section, "Default Min OA
Flow SETPOINT Screen" for max
airflow SETPOINTs. (if applicable)
Used With: All Units when VCM is
installed and C02 Reset is enabled or
DCV is enabled
Possible Values: 50 to 2000 PPM
49