Trane IntelliPak I Programming, Troubleshooting Manual page 107

Software Revision Number:
Unit Human Interface (HI)
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
Software Revision Number:
Remote Human Interface (RHI)
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
Software Revision Number:
Ventilation Control Module (VCM)
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
Software Revision Number:
BAS Communications: Comm5
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
Software Revision Number:
Multi-Purpose Module (MPM)
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
Software Revision Number:
Modulating Dehumid Module (MDM)
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
RT-SVP04F-EN
INVALID Used With: Screen always shown
32.00 Possible Values: Software Revision
Number: See note below; HI (before
the period): 0-255; HI (after the
period): 00-99
INVALID Used With: Screen shown only if
Remote Human Interface Module
32.00
installed
Possible Values: Software Revision
Number: See note below; RHI (before
the period): 0-255; RHI (after the
period): 00-99
INVALID Used With: Screen shown only if VCM
Module installed
4.00
Possible Values: Software Revision
Number: See note below; VCM (before
the period): 0-255; VCM (after the
period): 00-99
INVALID Used With: Screen shown only if LCI or
BCI Module installed
14.00
Possible Values: Software Revision
Number: See note below; Comm5
(before the period): 0-255; Comm5
(after the period): 00-99
INVALID Used With: Screen shown only on
IntelliPak II unit with MPM (Return Fan
1.0
or Energy Wheel) installed
Possible Values: Software Revision
Number: See note below; MPM (before
the period): 0-255; MPM (after the
period): 00-99
INVALID Used With: All units with
Dehumidification installed
1.0
Possible Values: 0-255 before the
period; 0-99 after the period.
System Configuration
107