Unit Operation Keys; Enter Key, Cancel Key; + (Plus) Key, - (Minus) Key, Previous Key, Next Key; Auto Key - Trane IntelliPak I Programming, Troubleshooting Manual

ENTER Key
This key will confirm the new values that were designated by pressing the + (Plus) or -
(Minus) keys at all edit points. When viewing status and diagnostics screens, it has no
function.
CANCEL Key
After changing data, at an editable screen, but before confirming it with the ENTER key,
pressing the CANCEL key will return the data to its previous value. This key shall also
function to clear active diagnostics.
+ (Plus) Key
When viewing a SETPOINT screen, this key will increase the temperature or pressure
value of the SETPOINT. When working with a status menu, it will add the current status
display to the custom menu. When viewing the SETUP or service test screens, it will
increase SETPOINTs or toggle choices On or Off at each edit point.
- (Minus) Key
This key when viewing the SETPOINT screen will decrease the temperature or pressure
value of the SETPOINT. When viewing the SETUP or service test screens, it will
decrease SETPOINTs or toggle choices On or Off at each edit point. When viewing the
custom menu, pressing the - (Minus) key will remove the status screen from the custom
menu. When viewing diagnostics screens it has no function.
PREVIOUS Key
Pressing the PREVIOUS key causes the LCD to scroll backwards through the various
displays for each menu. At displays with multiple edit points, it moves the cursor from
one edit point to another.
NEXT Key
Pressing the NEXT key causes the LCD to scroll forward through the various displays
for each menu. At displays with multiple edit points it moves the cursor from one edit
point to another.

Unit Operation Keys

AUTO Key

Pressing the AUTO key at any time will cause the display to go to the top level status
display and, if the unit is shutdown, will cause the unit to begin operation in the
appropriate mode no matter what level in the menu structure is currently being
displayed. If the current display is an editable display, the AUTO key will confirm the
desired edit.
RT-SVP04F-EN
General Information
13