Subaru 2001 FORESTER Service Manual page 89

Power Assisted System (Power Steering)
(2) RHD model
Connect pipes A and B to four pipe joints of gear-
box. Connect upper pipe A first, and lower pipe B
second.
Tightening torque:
T1: 20 N·m (2.0 kgf-m, 14.5 ft-lb)
T2: 24 N·m (2.4 kgf-m, 17.4 ft-lb)
(1) Pipe A
(2) Pipe B
LHD model
(1) High-pressure hose
(2) No interference is allowed between hoses.
(3) Clearance between crossmember and pipe: 3 — 8 mm (0.12 — 0.31 in)
PIPE ASSEMBLY
8) Install jack-up plate.
9) Connect battery ground terminal.
10) Feed the specified fluid.
NOTE:
Never start the engine before feeding the fluid; oth-
erwise vane pump might be seized up.
B4M0671G
PS-88
S4M0272B