Subaru 2001 FORESTER Service Manual page 82

RHD model
6) Disconnect pipe C·D.
(1) LHD model
Disconnect pipe C·D from pipe (on the gearbox
side).
CAUTION:
¼ When disconnecting pipe C·D, use two
wrenches to prevent deformities.
¼ Be careful to keep pipe connections free
from foreign matter.
(1) Pipe C
(2) Pipe D
PIPE ASSEMBLY
(2) RHD model
Using ST, remove flare nuts from control valve of
gearbox assembly, and then disconnect pipe.
ST 34099AC050 GEARBOX SPANNER
CAUTION:
¼ When
wrenches to prevent deformities.
¼ Be careful to keep pipe connections free
from foreign matter.
(1)
B4M2509A
7) Lower the vehicle.
8) Remove intake duct.
9) Remove bolt A.
(1) Remove air intake duct, air cleaner upper
cover and air intake boot.
<Ref. to IN(DOHC TURBO)-8, REMOVAL, Air
Intake
TURBO)-9, REMOVAL, Intake Duct.>
(2) Remove two bolts fixing pipe C and D.
(3) Remove coolant filler tank.
B4M1696B
PS-81
Power Assisted System (Power Steering)
disconnecting pipes,
Steering gearbox
Duct.> and <Ref.
use two
S4M0235B
to IN(DOHC
EN0126