Subaru 2001 FORESTER Service Manual page 58

13) Remove valve housing, pinion and valve as a
unit.
14) Remove holder using a 32 mm wrench or
adjustable wrench.
CAUTION:
Discard old holder and replace with new one.
STEERING GEARBOX [RHD MODEL]
G4M0819
G4M0820
PS-57
Power Assisted System (Power Steering)
15) Install ST on valve side of rack and press
outer side oil seal out.
ST 34099FA030 INSTALLER & REMOVER
CAUTION:
¼ Block pipe connection of steering body to
prevent fluid from flowing out.
¼ Do not allow rack to come in contact with
inner wall of cylinder. Otherwise, cylinder wall
may be scratched, resulting in oil leaks.
¼ Remove holder and rack as a unit.
¼ Check rack and steering body for bends or
cracks; replace as required.
¼ Discard oil seal after removal and replace
with new ones.
(1) Rack piston
(2) Outer side oil seal
S4M0411A