Subaru 2001 FORESTER Service Manual page 88

3) Temporarily connect pipes C and D. (LHD
model)
(1) Return hose
(2) Pressure hose
(3) Approx. 30 mm (1.18 in)
(4) Clamp E
(5) Pipe C
(6) Pipe
(7) Pipe (on gearbox side)
4) Using ST, temporarily connect pipes to control
valve of gearbox. (RHD model)
ST 34099AC050 GEARBOX SPANNER
(1) Steering gearbox
PIPE ASSEMBLY
5) Temporarily install clamp E on pipes C and D,
and tighten clamp E firmly.
CAUTION:
Ensure that the letter "8" on each clamp are
diagonally opposite each other as shown in fig-
ure.
Tightening torque:
7.4 N·m (0.75 kgf-m, 5.4 ft-lb)
(1)
(2)
6) Tighten joint nut.
S4M0438A
Tightening torque:
15 N·m (1.5 kgf-m, 10.8 ft-lb)
7) Connect pipe A and B.
(1) LHD model
Connect pipes A and B to four pipe joints of gear-
box. Connect upper pipe B first, and lower pipe A
second.
Tightening torque:
13 N·m (1.3 kgf-m, 9.4 ft-lb)
S4M0235B
(1)
(2)
PS-87
Power Assisted System (Power Steering)
Clamp E
Pipe C
Pipe A
Pipe B
B4M0667C
S4M0381A