Subaru 2001 FORESTER Service Manual page 80

RHD model
6) Disconnect pipe C·D.
(1) LHD model
Disconnect pipe C·D from pipe (on the gearbox
side).
CAUTION:
¼ When disconnecting pipe C·D, use two
wrenches to prevent deformities.
¼ Be careful to keep pipe connections free
from foreign matter.
(1) Pipe C
(2) Pipe D
(2) RHD model
Using ST, remove flare nuts from control valve of
gearbox assembly, and then disconnect pipe.
ST 34099AC050 GEARBOX SPANNER
CAUTION:
¼ When
disconnecting
wrenches to prevent deformities.
¼ Be careful to keep pipe connections free
from foreign matter.
PIPE ASSEMBLY
B4M2509A
S4M0382A
pipes, use two
PS-79
Power Assisted System (Power Steering)
(1) Steering gearbox
7) Lower the vehicle.
8) Remove intake duct and cleaner case. <Ref.
IN(SOHC)-8, INSTALLATION, Air Intake Duct.>
and <Ref. IN(SOHC)-7, Air Cleaner Case.>
9) Remove bolt A.
10) Disconnect pipe C from oil pump. Disconnect
pipe D from return hose.
CAUTION:
¼ Do not allow fluid from the hose end to come
into contact with pulley belt.
¼ To prevent foreign matter from entering the
hose and pipe, cover the open ends of them
with a clean cloth.
(1) Bolt A
(2) Pipe C
(3) Pipe D
2. TURBO MODEL
1) Set the vehicle on the lift.
2) Disconnect battery minus terminal.
S4M0235B
S4M0310B
S601277A1804