Subaru 2001 FORESTER Service Manual page 83

Power Assisted System (Power Steering)
(4) Disconnect pipe C from oil pump. Discon-
nect pipe D from return hose.
CAUTION:
¼ Do not allow fluid from the hose end to come
into contact with pulley belt.
¼ To prevent foreign matter from entering the
hose and pipe, cover the open ends of them
with a clean cloth.
(1) Pipe C
(2) Pipe D
PIPE ASSEMBLY
B: INSTALLATION
1. NON-TURBO MODEL
1) Tighten bolt A.
CAUTION:
Visually check that hose between tank and pipe
D is free from bending or twisting.
(1) Connect pipe D to oil tank.
(2) Connect pipe C or pressure hose to oil
pump.
CAUTION:
Use a new gasket.
Tightening torque:
39 N·m (4.0 kgf-m, 28.9 ft-lb)
(3) Tighten bolt A.
Tightening torque:
13 N·m (1.3 kgf-m, 9.4 ft-lb)
ST0012
(1)
(2)
(3)
PS-82
S601277A11
S601277A1103
Bolt A
Pipe C
Pipe D
S4M0310B