Item No.
U101
Setting the voltage for the primary transfer
Description
Sets the control voltage for the primary transfer.
Purpose
To change the setting when any density problems, such as too dark or light, occur.
Method
1. Press the start key.
2. Select the item. The screen for executing each item is displayed.
Base
1st side
2nd side
B/W
Setting: [Base]
1. Select the item to be set.
2. Change the setting value using the cursor left/right keys or numeric keys.
Display
Full
Half
3. Press the start key. The value is set.
Setting: [1st side/02nd side]
1. Select the item to be set.
2. Change the setting value using the cursor left/right keys or numeric keys.
Display
1st
2nd
3rd
4th
3. Press the start key. The value is set.
Display
Standard value
Correction value of single-side printing
Correction value of duplex printing
Correction value of monochrome printing
Description
Full speed printing
Half speed printing
Description
Correction value (Yellow)
Correction value (Cyan)
Correction value (Magenta)
Correction value (Black)
Description
Description
Setting
range
0 to 100
0 to 100
Setting
range
-50 to 50
-50 to 50
-50 to 50
-50 to 50
1-3-47
2MY/2MZ
Initial setting
20ppm
25ppm
40
45
25
25
Initial setting
20ppm
25ppm
0/-2
0/-3
4/2
5/2
4/2
0/2
4/2
5/2