Setting For Toner Applying Operation - Kyocera FS-C8520MFP Service Manual

Item No.
U140 Setting: [On Timing/On Timing]
1. Select the item to be set.
2. Change the setting value using the cursor left/right keys or numeric keys.
Display
1st
2nd
3rd
4th
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U147

Setting for toner applying operation

Description
Sets the mode for removing charged toner in the developer unit (T7 control: Toner applying oper-
ation).
Purpose
Changing settings are not required. However, when the documents with lower print density (e.g.
less than 2%) should customarily printed in a great volume, mode must be changed.
If the charged toner stays inside the developer unit, density decreases.
Setting
1. Press the start key
2. Select the item to be set.
3. Change the setting value using the cursor left/right keys or numeric keys.
T7
Drum T7
4. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Setting the value of yellowt.
Setting the value of cyan.
Setting the value of magenta.
Setting the value of black.
Display
T7 Operational mode
Drum T7 operational mode
Description
Description
Description
1-3-58
Setting
range setting
-500 to 500 0/0
-500 to 500 0/0
-500 to 500 0/0
-500 to 500 0/0
Initial
Setting range
setting
0 to 1 0
0 to 255 60
2MY/2MZ
Initial