Setting The Ncu; Setting The Connection To Pbx/Pstn; Setting Pstn Dial Tone Detection - Kyocera FS-C8520MFP Service Manual

Item No.
U660

Setting the NCU

Description
Makes setting regarding the network control unit (NCU).
Purpose
To be executed as required.
Method
1. Press the start key.
2. Select the item to be set.
Exchange
Dial Tone
Busy Tone
PBX Setting
DC Loop

Setting the connection to PBX/PSTN

Selects if a fax is to be connected to either a PBX or public switched telephone network.
1. Select the setting.
PSTN
PBX
* : Initial setting: PSTN
2. Press the start key. The setting is set.

Setting PSTN dial tone detection

Selects if the dial tone is detected to check the telephone is off the hook when a fax is connected
to a public switched telephone network.
1. Select the setting.
On
Off
* : Initial setting: On
2. Press the start key. The setting is set.
Display
Sets the connection to PBX/PSTN.
Sets PSTN dial tone detection.
Sets busy tone detection.
Setting for a PBX.
Sets the loop current detection before dialing.
Display
Connected to the public switched telephone network.
Connected to a PBX.
Display
Detects the dial tone.
Does not detect the dial tone.
Description
Description
Description
Description
1-3-118
2MY/2MZ