Setting The Id Correction Operation - Kyocera FS-C8520MFP Service Manual

Item No.

Setting the ID correction operation

U464
Description
Turns ID correction (calibration) on or off. Also, this determines the duration of calibration and the
timing of calibration during printing. Also, this allows individual settings for calibration operation by
enabling custom settings.
Purpose
To restrict calibration when poor image quality is generated. Also, this allows individual settings
for calibration by enabling custom settings in setting the calibration cycle under the machine
defaults depending on the user preferences.
Method
1. Press the start key.
2. Select the item to be set. The setting screen for the selected item is displayed.
Permission
Time Interval
Bias Target
Gamma Target
Calib
Setting: [Permission]
1. Select the item to be set.
2. Change the setting value using the cursor left/right keys or numeric keys.
Display
Calib
Paper Int Calib
3. Press the start key. The value is set.
Setting: [Time Interval]
1. Select the item to be set.
2. Change the setting value using the cursor left/right keys or numeric keys.
Display
Paper Int Calib
Sleep Out
T/C Calib
3. Press the start key. The value is set.
Display
Setting of operation permission
Setting of driving time
Setting of Bias target
Setting of quantities of light target
Execution of calibration
Setting the permission of calibration.
Setting the permission of calibration
between paper.
Setting the driving time of the calibra-
tion between paper.
Setting the execution time of sleeve
return calibration.
Setting the execution time of T/C cali-
bration.
Description
Description
Description
Description
1-3-88
Setting Initial set-
range ting
On/Off On
On/Off On
Setting Initial set-
0 to 100 10
0 to 100 20
0 to 100 10
2MY/2MZ