Checking The Operation Panel Keys; Setting The Ic Card Type - Kyocera FS-C8520MFP Service Manual

Item No.
U207

Checking the operation panel keys

Description
Checks operation of the operation panel keys.
Purpose
To check operation of all the keys and LEDs on the operation panel.
Method
1. Press the start key. The screen for executing is displayed.
2. [Count0] is displayed and the leftmost LED on the operation panel lights.
3. As the keys lined up in the same line as the lit indicator are pressed in the order from the top
to the bottom, the figure shown on the touch panel increases in increments of 1. When all the
keys in that line are pressed and if there are any LEDs corresponding to the keys in the line
on the immediate right, the top LED in that line will light.
4. When all the keys on the operation panel have been pressed, all the LEDs light for up to 10
seconds.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U222

Setting the IC card type

Description
Sets the type of IC card.
Purpose
To change the type of IC card.
Setting
1. Press the start key.
2. Select the item.
Other
SSFC
* : Initial setting: Other
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
The type of IC card is SSFC.
The type of IC card is not SSFC.
Description
Description
1-3-66
2MY/2MZ