Output An Own-Status Report (Maintenance Item U000); Exit Maintenance Mode; Print Out A User Setting List; Make Test Copies - Kyocera FS-C8520MFP Service Manual

Output an own-status report (maintenance item U000)

1. Enter 000 using the numeric keys and press the start key.
2. Select Maintenance and press the start key to output a list of the current settings of the maintenance
items.
3. Press the stop key.

Exit maintenance mode

1. Enter "001" using the numeric keys and press the start key.

Print out a user setting list

1. Select [Report Print] to print a user setting list.

Make test copies

1. Place an original and make test copies.
Attaching the language label (Excluding 240V AC)
1. Attach the corresponding language label as required.
Installation is completed.
(2) Setting initial copy modes
Factory settings are as follows:
Maintenance
item No.
U253
U260
U285
U326
U343
Switching between double and single counts
Selecting the timing for copy counting
Setting service status page
Setting the black line cleaning indication
Switching between duplex/simplex copy mode
Contents
1-2-13
2MY/2MZ
Factory setting
Double count
(A3/Ledger)
Eject
On
On/8
Off