4. Installation
Image 4-24
Stereo input connections
The BNC connectors are the stereo output sync signals. These signals will drive the emitters in case of active stereo projection
using active stereo glasses. The fact that the projector is providing two BNC is to allow the linking (stereo synchronization) of several
projectors in a multichannel projection system (see Multichannel installation).
The 2 BNC's are identical i.e. it does not matter to which BNC the emitter is connected.
How to connect the stereo input and output signals ?
1. Connect the mini-din male connector(s) to the projector's female mini DIN connector(s)
Image 4-25
2. Connect the BNC connector to the stereo IR emitter
Stereo settings
Different stereo settings have to be done :
30
Image Generator
Image Generator
IR Emitter
Image Generator
R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013
IR Emitter
Active Glasses