Linking Dynacolor - Barco Galaxy NW-12 User Manual

7. Advanced
Image 7-163
9. Press ENTER
A white bullet indicates the active setting
7.9.7.4

Linking DynaColor

C
AUTION
What can be done?
To calculate the common color triangle of multiple projectors and apply it to the selected DynaColor™ set in each of the projectors,
we can use Linked DynaColor™ which is part of the Linked Projectors feature of the projector.
Linking multiple projectors
See the section Setup of Linked projectors in a Multichannel system.
Linking DynaColor™ sets
1. Select the same DynaColor™ set in all projectors.
2. Enable DynaColor™ in all projectors.
3. In the Linked Projectors user interface of the Master, click the appropriate button (see the list below) in the DynaColor™ options
section.
- Link Set 1
- Link Set 2
- Link Infitec set
144
:
Only to be done by Barco trained and qualified engineers.
R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013