Display Setup; Textbox; Stereo Display Settings - Barco Galaxy NW-12 User Manual

7. Advanced
7.9

Display setup

Overview
•

Textbox

•

Stereo display settings

• Full screen synchronous representation settings
• Menu bar position
• Status bar position
• Slider box position
• Dynacolor
• Stereo System Setup
• Soft edge
• AutoImage Setup
• True motion reproduction (TMR)
7.9.1 Textbox
What can be done ?
The Text box function allows to choose whether the different text boxes are displayed or not.
How to enable/disable the Textbox ?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Textbox
5. Press → to pull down the menu
6. Use ↓ or ↑ to enable (ON) or disable (OFF) the textbox
Image 7-142
7. Press ENTER
A white bullet shows the active setting
7.9.2 Stereo display settings
Overview
• Introduction
• Stereo Mode
It is not possible to show an interlaced source in stereoscopic mode.
130 R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013