7. Advanced
The menu will contain an item L3 DVI-1 and an item L3 DVI-2
3. Use ↑ or ↓ to select L3 DVI-x
Image 7-7
4. Press ENTER to confirm your choice
A bullet indicates the selected DVI source which now appears on the screen.
Adjustments on a DVI signal
The digital nature of this signal eliminates the need of most adjustments
7.4
Image
Overview
•
Image settings
•
Gain control on Video
•
Aspect ratio
•
Color temperature
•
Input balance (RGB signals only)
•
Input stereo sync
•
Passive Infitec
•
Passive to Active Stereo
7.4.1
Image settings
7.4.1.1
Setting the Contrast
Contrast adjustments
Adjust the contrast to "brighten" the white parts of the image.
It is recommended to adjust the brightness before adjusting the contrast.
How to change the Contrast
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Contrast
7. Press ENTER
62
R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013